Arrow & Lionbridge Ads Evaluator projects workflow
After you have passed either the Lionbridge Ads or the Arrow ads exams, you will start getting access to different tasks. There are some things to keep in mind here. You should understand that if you are in a different market that the USA market, the training tasks are going to be in English. And as a side note, it’s going to be a good idea to have someone that is fluent in English ready in case you don’t understand something. Once you have passed all the initial training tasks, you will start to see tasks appear in the language, or region, that you applied for. There is a high chance that you will still see some English tasks come through. In fact, 70% of all tasks will be in English language.
RECORDING AND INVOICING WORKING TIME Appen Arrow and Lionbridge Ads Assessor project
Time management is one of the most important things you need to keep track of when you are doing your tasks. It’s recommended to track your time manually including the amount of tasks that you have completed. There are some free apps out there you can download for your computer, or you can use your timer app on any smartphone. I keep a small notepad and a pen handy and just cross down a line on paper for each task. Depending on how organized you are, it might take you some time to get used to this. Times sheets are reviewed every weeks starting on Monday and ending Sunday. Make sure you are entering the actual time it takes you from getting the task, to submitting it.
One of the tough things that a rater has when they first start is getting the quality up high and improving the quality of your rated tasks and keeping them there. That is likely because of the overwhelming amount of information to swallow at the beginning. The guidelines that you get need to become your bible so to speak. You should have them open always or easily accessible when you are rating so you can check some of the examples if you are confused about something. If you have some extra time to study the guide while not rating, then it’s a good idea to do this before rating. Don’t spend too much time going over the guide while rating. You are only allotted a certain amount of time for each task. So you can’t spend 15-20 minutes on one task and then bill for that if the task should only take you 5 minutes. Bookmark the examples in the guide for quick reference. Your tasks are reviewed and you will get some feedback concerning your rated tasks and where you can improve. You need to be prepared at all times so that when your quality is personally examined, you get good scores. All of this is very important because the client has a strict process that must be followed. By not following the process, you won’t supply the valuable data that is needed. Read the guidelines even after you passed the exam, and read them again and always refer to them when rating. Even the most experienced raters refer to the guide for help.
Appen Arrow blind test and Lionbridge Ads Assessor quality review tasks
Blind sets as they are called, are rating tasks that have the correct rating answers already correctly completed as they should be as per the guide. You will have no idea when these blinds sets come, or be able to identify them, but generally the blind quality tasks are uploaded to the system throughout the month, and you are graded on these to see if you are following the guidelines correctly, and applying the correct ratings. This is why it’s important to follow the guidelines at all times. In fact, it might be even better to not think about the blind sets at all since you will have no idea when you are doing them. We just thought it would be important for you to know that they are there. In total during a month working cycle there are will be about 150 blind test tasks of different types of tasks, raters are expected to obtain at least 70% of correct answers in the pool of blind test task, raters with lower quality score will be removed from the program.
Reasons for losing your service as an Ads Quality Rater
It can happen to anyone at any time. You could end up getting a short email from the company you work for at any time saying that your contract will not be renewed or that your service is no longer required on the project. We hope this doesn’t happen to you, but if it does it could be from some of the following issues.
Quality of service is really the big one here as the client needs each rater to strictly follow the guidelines and the processes of doing each rating. There are levels of quality and you should be sure to try and get the highest quality rating possible. Also its important to remember that just because you are at an acceptable level doesn’t guarantee job security. If there are a lot of raters for a project and a group of raters are providing much higher quality, then the ones at the bottom are likely to go first in the event of a downsizing or, the client just needs the best quality possible. It is advisable to keep striving for perfection when it comes to rating.
Participation in the program means that you must put in a required amount of hours or ‘minimum hours required’ which for most of these programs is 19-20 hours per week. Some programs require you to work at least one weekend day as well. If you miss a day or two on some projects, it will be OK but be careful because if you don’t participate on a regular basis then you end up losing access and are removed from the system. Regular participation in the projects also guarantees that you see a larger portion of different types of ads, and will certainly help you build up your quality levels.
IP address conflict/Internet Network sharing
In some cases people may share their Internet network, while working as search engine evaluator make sure that you have your personal unique IP address and no one uses the same IP to go online for rating project.Once you are in the Project, you may change your IP address many times, it will not affect your project status. Make sure that you do your project tasks in a private place as it stated in the contract.
Be informed that it is prohibited to have multiple accounts, without special arrangement. The customer can find duplicate accounts very fast (even if you are in different Google projects which administrated by different vendors), and as a result, you will lose both accounts.
No tasks are available, all task options are not available anymore except the QR code
This is a sign that system automatically cut your account from receiving tasks. Unfortunately this is an indication that your account has been deactivated due to unacceptable quality, such raters will be removed from the program shortly.
Lionbridge (Ads rating project) vs Appen (Arrow)
In this project, most of the tasks do not have any recommended time limits. Raters have to manage their own productivity and their own time. The customer does not indicate average estimated time because the priority is quality in rating the tasks rather than productivity, or how many tasks you rate. In this respect, Lionbridge is very loyal, and most invoices are approved without any issues. Of course, raters have to keep in mind that the productivity and time invoiced should be within reasonable metrics. It is OK to spend more time in the beginning and increase your productivity when becoming a more experienced rater.
Appen has it is own internal productivity metrics called RPH. It is assumed these metrics are based on the average raters’ performance in the project which is calculated as the ratio between the number of tasks and the time spent within an invoice period completed by all raters. In my view this metric is not useful, because in many cases raters get different types of tasks which require a different amount of time to complete, therefore the RPH metric is not accurate at all. This can lead to a situation where if your productivity doesn’t fall within their RGP metrics, your invoice will be returned for correction and they will ask you to align your RHP to average even though you spent a reasonable amount of time for completing more time-consuming tasks. The customer understands this issue. That is why they do not indicate the average estimated time. But it would seem that Appen(Leapforce) has again invented their own metrics to pay less to its raters.
Working hours and flexibility
At Lionbridge, there is no minimum requirement for working hours. However, the maximum normally is 20 hours and in some cases, the max might be increased.
At Appen there is a strict requirement to work a required number of hours as indicated in the consulting agreement (15-20 hours), not meeting this requirement may lead to removal from the project.
Lionbridge normally pays via direct deposit for US raters or wire transfer for raters in other countries. Non-US raters will receive their first payment only on the second month of work this due to their specific payment cycle set up.
Appen(Leapfroce) pays on a monthly basis via the Payoneer payment system, normally on 14th of every month.
Payoneer As a Payment Method for Appen, Raterlabs, Lionbridge and Utest – How to Get Rewarded with 25$?
In most markets, the Lionbridge payment hourly rate is 15-30% higher than what Appen pays for the same work. The customer sets the basic pay rate which is the same for all vendors (Lionbridge, Appen), and part of this rate goes to the vendor for project administration services and the other part is paid to raters. As some of you may know this project was previously administrated by Zerochaos and at that time the payment rate was 2 times higher than it is now. After Google outsourced this project to Appen and Lionbridge the payment rate was significantly reduced including US market.
More info about payment rates is available here:
Projects and Vendors Compatibility: How to Work on Several Projects and Do Not Violate Vendors Conditions? How Much Can You Earn With Lionbridge and Appen When Combining Several Projects?
The project itself is fully automated and was designed in a way that raters should manage their training and education, and work with minimum support. Those who fail are automatically removed from the project due to low quality etc. In general terms Appen provides better support by means of a monthly practice test and detailed feedback on those practice tasks, Lionbridge does not provide this type of support.
It might be beneficial to know that there is an optional agreement that you can sign that gives the vendor your personal browsing history that personalized tasks are generated by. Basically what that means is that you would get tasks to rate that would be based on your own personal browsing habits. A lot of people don’t want to do this for fear of sharing personal data with an employer. However, your data still remains private and the vendor will not see what websites you are visiting. It does add a little more personalization to your tasks though. This history is associated with the Google Account that you are signed into at the time of browsing, like if you were logged into Chrome and browsing the internet. It’s important to understand that Google has access to this data anyway, but it’s an optional thing whether you want your own personal history used for generating tasks.
The Final Word
If you can get in on this project, it can be very interesting while you are contributing to search engine or ad algorithms. Your direct contributions help to train specially written algorithms that help ads and search engine results become more relevant to the user. So it’s a very important job, and one that you should take seriously. However, this job is not for everyone. Unless you find looking at ads and webpages 4 hours a day, you might get bored very quickly. But for some this is the perfect part-time job because as long as you meet your productivity, deliver high accuracy and quality, then you could be on the project for as long as you want. As with all other Appen projects, you may even be invited to work on other projects too.
Appen Arrow invoice correction required due to low RHP
what is mystical RHP and is this practice legal?
In this project, most of the tasks do not have any recommended time limits. Raters have to manage their own productivity and their own time. The customer does not indicate average estimated time because the priority is quality in rating the tasks rather than productivity, or how many tasks you rate. Raters have to keep in mind that the productivity and time invoiced should be within reasonable metrics. It is OK to spend more time in the beginning and increase your productivity when becoming a more experienced rater.
Appen has productivity metrics called RPH. It is assumed these metrics are based on the average raters’ performance in the project which is calculated as the ratio between the number of tasks and the time spent within an invoice period completed by all raters.
In my view this metric is not useful, because in many cases raters get different types of tasks which require a different amount of time to complete, therefore the RPH metric is not accurate at all. This can lead to a situation where if your productivity doesn’t fall within their RPH metrics, your invoice will be returned for correction and they will ask you to align your RHP to average even though you spent a reasonable amount of time for completing more time-consuming tasks. The customer (Google) understands this issue. That is why they do not indicate the average estimated time. But it would seem that Appen invented their own metrics to pay less to its raters and make more money by invoicing actual time spent on doing task by all raters to Google. Good business, in fact. In this respect Lionbridge plays a fair game and most of raters get their time sheets approved without any issue.
The example of the email is bellow:
Dear Search Engine Evaluator,
Our records show a significant discrepancy between the hours you’ve written in your invoice and the amount of work completed. You over-billed more than xx hours for the week of x/x/201X – X/X/201X.
Please check our Chat feature, review our project information page and Intl FAQ.
Do not write your missed hours in your invoice time card as the entry will be considered billable.
In the meantime, these hours will not be approved until clarification has been received.
Please let us know if there’s ever an issue outside your control that is impacting your overall productivity such as tool errors.
The productivity rate/ rate per hour (RPH) is calculated by looking at the average of team who worked on a particular task. When you have a low RPH it negatively impacts the RPH average of the entire team and project. It is our expectation that raters meet the average rate per hour on a consistent basis. Listed below are some tips to try if you have not done so already, to hopefully push your rate per hour to the average:
• Time Management: Refrain from multi-tasking while working on EWOQ. Watching videos or listening to music not associated to a task may impact your focus and performance.
• Timing Devices:
In order to get a better feel for how fast or slow you are working, you might consider using a desktop timer, Toggl, or stopwatch. Always exit EWOQ when taking a break, no matter how short. Do not count the time spent on breaks towards your billable hours.
A company can’t just suddenly take away your pay when you put in the hours and did the required tasks to the best of your ability and as per your contract. There are some laws that protect freelancers and independent contractors, and if you are doing the work, then you should be paid. But for freelancers and independent contractors, your options are limited depending on what country you live in.
What raters can do in this situation?
- Before making any invoice correction, ask Appen for detailed clarification about RHP: what is the RPH ratio for all raters; what is your own RHP ratio, what is recommended RPH ratio, what is average recommended time for completion each type of tasks, ask them to provide list of average estimated time for completion for each type of tasks, ask why customer does not indicate recommended time for completion for many types of tasks. Be ready that they will not provide any info, because there is no official RHP approved by customer (Google).
- Point out that fact there is neither any policy regarding RHP can be found on Appen connect project platform nor customer (Google) does not provide any recommended time for most of tasks.
- Notify Google about the issue by sending email to the ads rating project admin (Google Ads Eval: email@example.com) to make them aware that this is some kind of issue that really needs to be investigated. The message should be the following: actual time spent on doing live tasks was not approved due to RHP, what is the RHP ratio for all raters; what is your own RHP ratio, what is recommended RHP ratio, what is average recommended time for completion each type of tasks, ask them to provide list of average estimated time for completion for each type of tasks, ask why Google does not indicate recommended time for completion for many types of task. FINALLY ask them – is it legal that Appen cuts hours based on mystical RHP which is not trasparant?
Perhaps if the right people receive a large response on the issue, someone will take a look and fix the problem. But as of right now things aren’t looking too good. For those of you who have lost wages, hang in there and hopefully, someone will get this straightened out.
If you have questions or comments then leave them below.